TYB Series Coalescence Separation Oil Pruifier:
TYB series fuel oil, light oil lubricating oil filter:
The utility model is mainly used for the rapid removal of impurities and moisture in oil, aviation fuel, gasoline, kerosene, diesel oil, light and low viscosity lubricating oil.
Technical features:
1. This equipment use medium with different surface tension, using inorganic fiber needle puncture of emulsified water for demulsification, using hydrophilic material of the oil in the water and the coalescence of hydrophobic materials in oil water separation. The demulsification and coalescence separation of free water and emulsified water are realized.
2. this type of oil filter adopts special oil and water separator, which does not need to be heated, and the dewatering efficiency is more than 20 times that of other types of oil filters.
3. due to non heating, reduce energy consumption and operating costs.
4. uses the high accuracy step by step filtration system to filter out the mechanical impurities in the oil.
5. simple operation, can automatically run online drainage, unattended.
6. running cost, than the vacuum oil filter, centrifuge, plate and frame pressure filter cost 20-40%.
Technical data:
Item | Unit | TYB -10 | TYB -20 | TYB -30 | TYB -50 | TYB -80 | TYB -100 | |
Flow Rate | L/min | 10 | 20 | 30 | 50 | 80 | 100 | |
working Preuusre | Mpa | ≤0.4 | ||||||
power | / | 380V/50HZ(at user's option) | ||||||
noise db(A) | dB(A) | ≤65~80(depend on user's requirement) | ||||||
Fult-free working hours | h | ≥4000 | ||||||
continuous hours | h | ≥150 | ||||||
Total Power | Kw | 1.1 | 1.1 | 1.1 | 1.5 | 2.2 | 3 | |
weight | kg | 80 | 100 | 120 | 150 | 200 | 220 | |
After filteration | water content | ppm | ≤100 | |||||
granularity | μm | ≤5(at user's option) |