Stainless steel ozone mixing pump self-priming vapor-liquid mixing pump 40QY-6:

Overview

The gas-liquid mixing pump is a series of horizontally installed self-priming gas-liquid mixing pumps, which are connected by standard click couplings. The flow parts of the pump are all made of stainless steel.

The suction port of the gas-liquid mixing pump can take advantage of the negative pressure to suck in the gas, so there is no need to use a gas compressor and an atmospheric ejector. The high-speed rotating pump impeller mixes the liquid with the gas, so there is no need for agitators and mixers. Due to the pressurized mixing in the pump, the gas and the liquid are fully dissolved, and the dissolution efficiency can reach 80~99%. Therefore, a highly dissolved liquid can be prepared without a large pressurized dissolved gas tank or an expensive reaction tower. A gas-liquid mixing pump can perform gas-liquid suction, mixing, dissolving and directly send the highly dissolved liquid to the point of use. Therefore, the use of gas-liquid mixing pump can improve the efficiency of solution gas-liquid preparation, simplify the preparation device, save space, greatly reduce the initial investment, save operating costs and maintenance costs.

Application scope of gas-liquid mixing pump

The gas-liquid mixing pump is suitable for liquid transportation, enterprise mixing, circulation and pressurization. typical application:

Air flotation treatment equipment, ozone water production equipment, oxygen-enriched water production equipment, biochemical treatment equipment, etc.;

Circulating transfer of heating medium and refrigerant for various temperature adjustment devices;

Various filter devices;

Extracting or high-pressure transportation of gasoline, diluent, various solvents and other low-viscosity liquids from underground storage tanks;

Spray treatment of clean water, pure water, food, chemical liquid, waste liquid, etc.;

Harsh applications such as intermittent operation, water hammer, and sudden changes in back pressure. Such as: small steam furnaces, high-rise water supply, high-pressure water injection into high-pressure tanks, suction by vacuum tanks;

Take sample water from rivers or water storage tanks, transfer foaming liquids, and transport in long and horizontal pipelines that are prone to air pockets.

Operating conditions of gas-liquid mixing pump

Thin, clean, low viscosity liquid; PH range is 3-9;

Liquid temperature -15℃~120℃; Ambient temperature: +40℃;

The gas-liquid volume ratio is about 1:9 (the suction volume is 8~10%);

The self-priming height is 9-NPSH (m).

Technical data