JIS C 3410 250V MPYS FA-MPYS Control and Signal Cable:
CABLE DESIGNATION
250V MPYS, FA-MPYS
250V MPYCS, FA-MPYCS
250V MPYCYS, FA-MPYCYS
APPLICATION STANDARD
- Design guide : JIS C 3410(1999)
- Flame retardant : IEC 60332-1 & IEC 60332-3 Category A (FA-Type)
- Cold bend/impact : CSA 22.2 No. 03 (-35 ℃) (Cold Type)
- Max. conductor temperature : 85℃
TECHNICAL DATA
1. CABLE TYPE:250V (FA-)MPYS, 250V (FA-)MPYCS, 250V (FA-)MPYCYS
No. of Cores : 2, 4, 5, 7, 9, 12, 16, 19, 23, 27, 33, 37, 44, 77.
Nominal Area(mm2):1.0
Classification | Code | Construction Detail |
Conductor |
M | Stranded tinned annealed copper wires as per JIS C 3410. |
Insulation | P | EPR as per JIS C 3410. |
Cabling |
Insulated conductors shall be
cabled. Flame retardant & non-hygroscopic fillers may be used. Suitable tape(s) may be applied on the cabled core. |
|
Common shield | S | Tinned copper wire braid |
Sheath | Y | PVC as per JIS C 3410. |
Armor | C |
Braid of galvanized steel
wires. Coverage density is minimum 90%. |
Paint |
The white paint shall be painted
uniformly on the steel wire braid Protective covering Type, paint is dispensable. |
|
Protective Covering | Y |
PVC as per JIS C 3410. Outer sheath color : Black |
Core identification | Black No. on white insulation | |
Note Fire resistant type (“FRA-”) & Cold type cable (“(C)”) can be supplied. |