ZJD10 Overhead Flood Projector:

The scope of application

ZJD10 is suitable to fix on the left and right upside or the top of back wall at hangar with bilateral symmetry for illumination at the platform of rising and landing, to offer the pilots and ground crew to recognize all kinds of mark line and make the work go smoothly.

Products feature

1. The shell is made of good quality stainless steel.

2. The light body can be rotated through horizontally and vertically to adjust the angle of illumination.

3. Adopt high quality silicone rubber for sealing with good waterproof performance.

4.The lampshade glass is toughened, which can be bear the temperature sudden changes about 250℃and with the feature of transmission of light.

5.The cable outside diameter is Φ9～Φ11 mm.

Adopt standard

1. Conform to GJB534B-2009 STANDARD of GENERAL REQUIREMENTS FOR HELICOPTER FACILITIES OF NON-AVIATION SHIPS.

2. Conform to RULES FOR CLASSIFICATION OF SEA-GOING STEEL SHIPS.

3. Conform to GB/T3027-2012 STANDARD of MARINE ILLUMINATE LIGHTS COMMONLY USED TECHNOLOGY CONDITIONS.

4. Conform to CAP437-2013 STANDARD of SAFETY REGULATIONS FOR MARINE HELICOPTER DECK PLATFORM.

Installation

ZJD10 Overhead Flood Projector Specification